Pharmashelve System

Installation and Usage

Pharmashelve is very easy to install and can be done by individuals with only a standard knowledge of basic DIY techniques. By following these simple installation instructions your Pharmashelve Storage Solution will be up and operational in less than 30 minutes.

• After measuring the width of an individual Pharmashelve shelf, simply attach the vertical support post by loosely screwing the “L” shaped pharmashelve bracket firstly to the wall and then to the support post
• Slot the top shelf first into the pre-engineered holding slots
• Next, fit one of the lower shelves in the same way. This will ensure you have positioned the vertical post in the correct position, both at the top and bottom of the system.
• With these two shelves in position, you can now tighten the wall brackets to the wall and support post
• Now fit the bottom horizontal support shelf by securing four screws, one each at each corner of the shelf
• You can now easily slot into place all the individual Pharmashelve shelves
• The bottom storage draw neatly slides under the bottom shelf without any need for separate attachment
• The final part of the installation is to slot all the clear product viewer slats into the front of each shelf
• Your pharmashelve pharmaceutical storage bay is now fully installed and ready to sock

After you have followed these simple installation instructions, the Pharmashelve unit is ready to use. The following points explain in a little more detail how to use Pharmashelve and how to get the most out of the systems unique features.

• The shelves open easily by lifting the catch bar located under each shelf
• The black "bungee cord" offers resistance to ensure the shelf never opens accidentally and then draws the shelf closed after use
• The shelf then naturally locks shut when the catch bar is released
• The carefully designed draw runner enables each shelf to open at nearly double the shelf’s depth to make product retrieval from any part of the shelf very simple
• The bottom storage draw is very free moving and can be easily opened with one hand to remove stored product